Santerno Sinus M - 11.2 Monitoring the I;O terminal; Input terminal status monitoring; Output terminal status monitoring

11-4
11.2 Monitoring the I/O terminal
 Input terminal status monitoring
Group Display Parameter Name Setting Range Default Unit
I/O group
I25
[Input terminals status
display]
-

Current input terminal status (ON/Off) can be monitored in I25.
 For example: The following is displayed when P1, P3, P4 are ON and P2, P5 are OFF.
 Output terminal status monitoring
Group Display Parameter Name Setting Range Default Unit
I/O group
I26
[Output terminals status
display]
-

Current output terminals (MO, relays) status (ON/Off) can be monitored in I26.
 For example: The followings are displayed when Multi-function output terminal (MO) is ON with Multi-
function relay OFF.
P8 P7 P6 P5 P4 P3 P2 P1
(ON)
(O
FF)
3AC MO
(ON)
(OFF)