SANY SY95C - Serial Number Location; Product Identification Plate; Frame Serial Number; Swing Motor Identification Plate

1-4
INTRODUCTION
SY95C Excavator OMM
Serial Number Location
Product identification plates are located in various places on the excavator. These list model and serial numbers that
will be needed by a SANY dealer when ordering replacement parts or providing assistance for your machine.
Product Identification Plate
0004492
Figure 1-2
The identification plate is on the lower right front of the cab.
Frame Serial Number
0004493
Figure 1-3
The frame serial number is stamped on the front of the travel carriage frame.
Swing Motor Identification Plate
0004495
Figure 1-4
The identification plate is on the side of the swing motor.