SANY SY95C - Controls; Hydraulic Lockout Control Lever

3-22
MACHINE CONTROLS
SY95C Excavator OMM
Controls
0004480, 0004481, 0004482
Figure 3-40
Hydraulic Lockout Control Lever
0004483
Figure 3-41
WARNING
Always place the hydraulic lockout control lever
in the locked (closed) position before leaving the
seat. Unintended movement of the joysticks or
travel control levers/pedals could result in death
or serious injury.
NOTE: Keep all the control levers in a neutral position
when moving the hydraulic lockout control lever to
the unlocked (open) position.
The hydraulic lockout control lever (1) disables or
enables the hydraulic function for work equipment, swing
and travel control, and optional equipment.
Move the hydraulic lockout control lever up to the
unlocked (open) position (2) to enable hydraulic controls.
1) Hydraulic lockout control lever (page 3-22) 4) Right joystick (page 3-23)
2) Left joystick (page 3-23) 5) Dozer blade control lever (page 3-26)
3) Travel control levers and pedals (page 3-26)
5
4
2
3
1
3
2
1