MACHINE CONTROLS
3-21SY95C Excavator OMM
Battery Disconnect Switch
• Never turn the battery disconnect switch to OFF
while the engine is running. This can damage the
electrical system or cause the machine to
operate improperly.
• After machine shutdown, wait at least 1 minute
for the engine control module (ECM) to complete
its shutdown before turning the battery
disconnect switch to OFF.
Failure to follow this notice could damage the
machine or cause it to operate improperly.
0004471
Figure 3-39
The battery disconnect switch (1) is in the right access
compartment. Turn the switch to the OFF position to
isolate the battery from the electrical system when
securing the machine for the day, or as needed for
maintenance tasks. The red battery disconnect switch
handle can be removed in the OFF position to secure the
machine.
To Next Page
Loading...
