4-20
MACHINE OPERATION
SY95C Excavator OMM
Restricted Operation
• Use caution when operating work equipment
while the machine is traveling.
• When the engine auto idle is on, moving any
control lever increases the engine speed.
• Avoid sudden stops when operating work
equipment. Hydraulic shock can damage the
hydraulic system.
• Avoid any working conditions that may cause the
machine to tip over.
• Avoid moving any control lever or pedal to
abruptly change the direction of the machine.
• Do not operate the machine on any ground that
lacks sufficient support.
• Do not attempt work operations such as
scraping, digging, etc., with the hydraulic
cylinder fully extended.
Failure to follow these precautions could result in
injury or damage to the machine.
Never Operate with Bucket Force
0003880
Figure 4-42
Never use the landing force of the bucket for excavating,
digging, breaking, or pile-driving operation. Such
operations may reduce the service life of the machine.
0003881
Figure 4-43
To avoid hydraulic cylinder damage, do not use the
bucket to strike or compact the ground.
Never Use Swing Force
0003898
Figure 4-44
Never use the swing force to compact the ground or to
break objects. Such operation is very dangerous and
may reduce the service life of the machine.