SANY SY95C - Never Use Traveling Force; Never Operate Using Machine Weight; Do Not Operate a Cylinder to the Stroke End

MACHINE OPERATION
4-21SY95C Excavator OMM
Never Use Traveling Force
0003878
Figure 4-45
Never use the machine’s traveling force to cut the bucket
into the ground to excavate. Such an operation may
damage the machine or the work equipment.
Never Operate Using Machine Weight
0003882
Figure 4-46
Never raise the rear or front of the machine to use the
machine’s weight to excavate. Operating while using the
machine’s weight may damage the machine.
Do Not Operate a Cylinder to the
Stroke End
0003899
Figure 4-47
Avoid operating the machine with any cylinder fully
retracted or extended.
If the cylinder piston reaches its end of stroke, continued
use of the work equipment could damage that cylinder.