Operating Instructions Combics CAIXS2 105
Data interfaces
h
If the weight value is output with 10-fold increased resolution, this value is not
permitted to be printed or saved in a weighing instrument operated in legal
metrology in the SBI mode. In this case, the unit symbol is not included with
output.
Configuring the Data Interface as a Printer Port
(printer)
You can connect one or two strip printers or one or two label printers to the
Combics. Configure the COM1 and UniCOM interfaces as printer ports in the
Printer menu item.
There are several actions that generate the command for outputting data to the
printer port:
– Pressing the p key. If the operating menu is active, all menu settings under
the active menu level are printed.
– Upon receipt of the “Esc k P _" SBI command.
For details, see the section entitled “Data Input Format” in this chapter.
– In some applications, pressing a given key (e.g., to save a value or start a
routine) also generates a print command. In this case, a configurable printout
is generated with application-specific data.
The P and l symbols are displayed when data is being output to the printer port.
To Next Page
Loading...