Sartorius Combics 2 CAIXS2 - Menu Applications

Operating Instructions Combics CAIXS2 127
Menu Structure
DEC.PLCS Decimal place in displayed result 3.10
WITHOUT none 3.10.1
1 Dec.Pl 1 decimal place 3.10.2
2 Dec.Pl. 2 decimal places 3.10.3
3 Dec.Pl. 3 decimal places 3.10.4
SAVE WT. Parameter for saving weight values 3.11
STABIL With stability* 3.11.1
ACC.STAB With increased stability* 3.11.2
REF.WP Reference weighing instrument 3.13
NO WP No weighing platform selected 3.13.1*
WP 1 Weighing platform 1 3.13.2
WP 2 Weighing platform 2 3.13.3
CALC.DIS Calculated values display 3.15
RESIDUE Residue 3.15.1*
LOSS Calculation 3.15.2
APPLIC./ APPLIC.2 OFF
APPLIC./ APPLIC.2 CHECK.WG Checkweighing
CHECK.RG Checkweighing range 4.2
30-170% 30 to 170% 4.2.1*
10-MAX.L 10% to infinity 4.2.2
CTRL.SET Activate SET control output 4.3
OUTPUT “SET" output 4.3.1*
OP.READY Ready to operate (for process control systems) 4.3.2
OUTP.ACT Port lines 4.4
OFF off 4.4.1
ALWAYS always 4.4.2
STABIL on at stability 4.4.3
CHECK.RG on within checkweighing range 4.4.4*
STAB.CHK On at stability within checkweighing range 4.4.5
INPUT Parameter input 4.5
TAR.MN.MX Min, Max, target value 4.5.1*
TARG.PER. Only target value with percent limits 4.5.2
TAR.A.PER Target value with asymmetrical percent limits 4.5.3
TAR.TOL Target value with relative tolerances 4.5.4
AUT.PRNT Automatic printing 4.6
OFF off 4.6.1*
ON on 4.6.2
OK Only values within tolerance 4.6.3
NOT OK Only values outside tolerance 4.6.4
APP.ZERO Checkweighing toward zero 4.7
OFF off 4.7.1*
ON on (Symbol Y is displayed) 4.7.2
APPLIC./APPLIC.2 CLASS. Classification
PARAM.1 Parameter 1
MIN.INIT Minimum load for application 3.6
1 DIGIT 1 scale interval 3.6.1*
2 DIGIT 2 scale intervals 3.6.2
... see “Weighing"
1000 d 1000 scale intervals 3.6.10
PARAM.2 Parameter 2
CTRL.SET Activate SET control output 4.3
OUTPUT “SET" output 4.3.1*
OP.READY Ready to operate (for process control systems) 4.3.2
OUTP.ACT Port lines 4.7
OFF off 4.7.1
ALWAYS always 4.7.2
STABIL on at stability 4.7.3*
QTY. Number of classes 4.8
3 CLASS 3 classes 4.8.1*
5 CLASS 5 classes 4.8.2
INPUT Parameter input 4.9
WEIGHTS Weight values 4.9.1*
PERC.TAG Percentage values 4.9.2