Sartorius Combics 2 CAIXS2 - Menu Applications

128 Operating Instructions Combics CAIXS2
Menu Structure
PRINT Automatic printing 4.10
MANUAL manual 4.10.1*
AUTOMAT automatic 4.10.2*
Applic.3 off
APPLIC/ APPLIC.3 NET.TOT. Net-Total
MIN.INIT Minimum load for application 3.6
1 DIGIT 1 scale interval 3.6.1*
2 DIGIT 2 scale intervals 3.6.2
... see “Weighing"
1000 d 1000 scale intervals 3.6.10
PRT.SAV. Individual/Component printout when saved 3.17
OFF Automatic printing off 3.17.1
EACH.TIM. Print the entire standard print configuration every time with
the O key function 3.17.2*
ONCE Print the entire standard print configuration once with the O key 3.17.3
Applic./Applic.3/TOTALIZ Totalizing
MIN.INIT Minimum load for application 3.6
1 DIGIT 1 scale interval 3.6.1*
2 DIGIT 2 scale intervals 3.6.2
... see “Weighing"
1000 d 1000 scale intervals 3.6.10
AUTO.SAV Autosave 3.16
OFF Off 3.16.1*
ON On 3.16.2
PRT.SAV. Individual/Component printout when saved 3.17
OFF Automatic printing off 3.17.1
EACH.TIM. Print the entire standard print configuration every time with
the O key function 3.17.2*
ONCE Print the entire standard print configuration once with the O key 3.17.3
VAL.FROM Value source for automatic saving 3.22
APPL. 1 Application 1 3.22.1*
APPL. 2 Application 2 3.22.2
SAV.VAL. Save value 3.23
NET Net 3.23.1*
CALCUL. Calculation 3.23.2
NET+CAL Net and calculated 3.23.3
APPLICATION / AUT.TARE Automatic taring
AUT.TARE 1st Weight tared 3.7
OFF Off 3.7.1*
ON On 3.7.2
APPLICATION/MIN.TARE Minimum load for automatic taring and automatic printing
MIN.TARE Minimum load for automatic taring and printing 3.5
1 DIGIT 1 scale interval 3.5.1*
2 DIGIT 2 scale intervals 3.5.2
... see “Weighing"
1000 d 1000 scale intervals 3.5.10
APPLICATION / AUT.STRT For"On" automatic start of application with the last saved initialization data
AUT.strt Automat. start of application with the last saved settings 3.8
AUTOMAT Automatic (on) 3.8.1*
MANUAL manual (off) 3.8.2
APPLIC./CLER.CF Selective deleting with the c key
CLER.CFSelective deleting with the c key 3.24
ALL.APPL. Deletes all applications 3.24.1*
SEL.APPL Only deletes selected application 3.24.2
APPLIC. / TARE.FNC Tare function
TARE.FNC Tare function settings 3.25
NORMAL Can add a preset tare if tare value is available;
however no tare function possible 3.25.1*
SPECIAL When a preset tare is entered, the tare value is deleted;
however, tare function activation is possible 3.25.2