Operating Instructions Combics CAIXS2 129
Menu Structure
APPLIC. / RESET Resets all applications to factory settings
RESET Restore all applications to factory default settings 9.1
YES Yes (restore factory settings) 9.1.1
NO No (retain user-defined settings) 9.1.2*
Menu Key Assignment for the k Key
* = Factory settings fn-key OFF k key not assigned
2ND.UNIT Display 2nd unit*
SQMIN
Setup Menu (Device Settings)
setup / WP-1 / RS-232 Depending on the connected complete scale
SBI-STDS / SBI.EICH / XBPI.232 / ADU-232
setup / WP-1 / RS-485 Depending on the connected complete scale
IS-485 / ADU-485
setup / WP-1 / intern. Param.1
AMBIENT Adapting the scale to ambient conditions (filter adjustment) 1.1
V.STABLE very stable 1.1.1
STABLE stable 1.1.2*
UNSTABLE unstable 1.1.3
V.STABLE very stable 1.1.4
APP.FILT application filter 1.2
FINAL.RD. final readout 1.2.1*
FILLING filling mode 1.2.2
REDUC. low filtering 1.2.3
OFF without filtering 1.2.4
Stab.Rng Stability range 1.3
MAX.ACC. maximum accuracy (1/4 digit) 1.3.1*
V.ACC. very accurate (1/2 digit) 1.3.2
ACC. accurate (1 digit) 1.3.3
FAST fast (2 digits) 1.3.4
V.FAST very fast (4 digits) 1.3.5
MAX.FAST. maximum speed (8 digits) 1.3.6
STAB. DLY Stability delay 1.4
NONE no delay 1.4.1
SHORT short delay 1.4.2*
MEDIUM medium-length delay 1.4.3
LONG long delay 1.4.4
TARE Tare mode 1.5
W/O.STAB on 1.5.1
AFT.STAB off 1.5.2*
Aut.zero Auto zero 1.6
ON on 1.6.1*
OFF off 1.6.2
1.WT.UNIT Weight unit (depends on the weighing platform type) 1.7
1)
)not for use in legal metrology
GRAM gram/g 1.7.2*
KILOGR. Kilograms/kg 1.7.3
CARAT carats/ct
1)
1.7.4
POUND pounds/lb
1)
1.7.5
OUNCE ounces/oz
1)
1.7.6
TROY.OZ. troy ounces/ozt
1)
1.7.7
HK TAEL Hong Kong taels/tlh
1)
1.7.8
SNG.TAEL Singapore taels/tls
1)
1.7.9
TWN.TAEL Taiwan taels/tlt
1)
1.7.10
GRAIN Grains/GN
1)
1.7.11
PENNY.WT. Pennyweights/dwt
1)
1.7.12
MILLIGR. Milligrams/mg
1)
1.7.13
PART./PD Parts per Pound//lb
1)
1.7.14
CHN.TAEL Chinese taels/tlc
1)
1.7.15
MOMME Mommes/mom
1)
1.7.16
KARAT Austrian karats/K
1)
1.7.17
To Next Page
Loading...