Operating Instructions Combics CAIXS2 171
FM Certificate
FM APPROVALS PROJECT NO: 3049923
Page 10 of 10
7 MANUFACTURER’S RESPONSIBILITIES
7.1 Documentation that is applicable to this approval is on file at FM Approvals and listed in
the Documentation File, Section 8, of this report. No changes of any nature shall be
made unless notice of the proposed change has been given and written authorization
obtained from FM Approvals. The Approved Product - Revision Report, FM Approvals
Form 797, shall be forwarded to FM Approvals as notice of proposed changes.
7.2 The manufacturer shall supply copies of Control Drawing number 66015-751-07 with
each transmitter. The manufacturer shall make additional copies available upon request.
7.3 The manufacturer shall make any Special Conditions of Use available to the user of the
Product.
7.4 The manufacturer shall carry out verifications or tests necessary to ensure that the
electrical equipment produced complies with the documentation listed in section 8.
7.5 In accordance with the Master Agreement, the manufacturer shall make full and
immediate disclosure to FM Approvals of all information concerning any defect in, or
potential hazard of, the product or service manufactured or provided by the Customer
which is Approved by, or being examined by, FM Approvals. The manufacturer shall
make all necessary arrangements for the investigation of complaints / anomalies
applicable to this approval and shall keep records of all complaints / anomalies including
actions taken.
8 DOCUMENTATION
See attached blueprint report.
9 CONCLUSION
9.1 The apparatus described in section 1.4.1 and 1.4.2 meets FM Approvals requirements.
Since a duly signed Master Agreement is on file for this manufacturer, US and Canadian
Approval is effective the date of this report.
9.2 On the basis of the described examination and tests, it is concluded that the apparatus
identified in Section 1.4.3 of this report meets the requirements for the issue of an EC
Type Examination Certificate by FM Approvals Limited as requested in the application
and as noted in Section I of this report. Issue date is effective the date of the EC Type
Examination Certificate.
PROJECT DATA RECORD:
0003049923
ATTACHMENTS:
Control Drawing 66015-751-07 (1 sheet)
Label Drawing 1000004644 (1 sheet)
Blueprint Report (3 sheets)
To Next Page
Loading...