SATO CL4NX - Page 332

330
[Print darkness level range]
Model Head
density
Parameter valid range When setting outside of valid range
203 dpi 1, 2, 3, 4, 5
305 dpi 1, 2, 3, 4, 5
CL4NX
609 dpi 1, 2, 3, 4, 5
Command error will occur when other values than
parameter valid range in the left is specified.
203 dpi 1, 2, 3CL6NX
305 dpi 1, 2, 3
Command error will occur.
However it will work as 2 for 305 dpi when 4 or 5 is
specified.
[Print darkness range]
Parameter valid range When setting outside of valid range
A From B to F are reserved. The same darkness as A.
Print darkness other than from A to F will be replaced with A. (It will not be a
command error.)
Parent topic System Command