SATO CL4NX - Page 412

410
RFID print command RFID setting command RFID auxiliary
command
Write Read Data Setting Return Setting Read/Return Data
<RU>
RFID print items which do not have print objects
Only perform writing to tag and not feed labels if the items include RFID print command (writing)
<IP0> and <RK> but not print objects.
In this case, short buzzer sound twice when writing to tag is succeeded, and short buzzer sound 6
times when writing to tag is failed.
When 1 is specified to fsx : parameter, <IP0> and <RK> commands feed items even if they do not
include print objects.
[ESC+IP0] EPC code write (UHF M6e) (CL4NX Only)
[ESC+F] EPC sequential number (UHF M6e) (CL4NX Only)
[ESC+IP5] Antenna output power (UHF M6e) (CL4NX Only)
[ESC+TM] Trademark print (UHF M6e) (CL4NX Only)
[ESC+TU] Printing tag data (UHF M6e) (CL4NX Only)
[ESC+RU] EPC/TID return (UHF M6e) (CL4NX Only)
[ESC+RK] RFID write (ISO/IEC15693) (CL4NX Only)
[ESC+TU] Printing tag data (ISO/IEC15693) (CL4NX Only)
[ESC+RU] UID return (ISO/IEC15693) (CL4NX Only)
[ESC+RK] RFID write (ISO/IEC14443 TypeA) (CL4NX Only)
[ESC+TU] Printing tag data (ISO/IEC14443 TypeA) (CL4NX Only)
[ESC+RU] UID return (ISO/IEC14443 TypeA) (CL4NX Only)
[ESC+RK] RFID write (FeliCa) (CL4NX Only)
[ESC+TU] Printing tag data (FeliCa) (CL4NX Only)
[ESC+RU] IDm return (FeliCa) (CL4NX Only)
Parent topic Part 1 SBPL Commands