SATO CL4NX - Page 483

481
type)
98
Attribute data
size
(9)
0x00
99
0x02
100
Attribute data
(9)
0x00
102
Attribute type
0x10
103
0x49(Vendor
extension)
104
Attribute data
size
0x00
105
0x06
106
Attribute data
0x00
33
107
0x37
34
108
0x2A
35
109
0x00(Version2(2))
36
110
0x01
37
111
0x21
Major:2
Minor:1
112
Terminator code
0xFE
Data in the byte position outside for writing is maintained.
User memory area
[Coding sample5] (data format set to ASCII)
When writing 13-byte characters “4912345678904” to NTAG203 RFID tag, with “Ignore RFID tag
error” omitted
<A>
<V>50<H>50<BD>3020654912345678904
<RK>1,D13,4912345678904
<Q>2
<Z>
Memory data after execution
Block
0
1
2
3
4
5
6
7
8.....39
40
41
Data
4912
3456
7890
4XXX
Any data outside of the range written
to is not affected.
* XXX is data present before this command
was set.
[Coding sample6] (data format set to HEX)
When writing 13-byte characters “4912345678904” to NTAG210 RFID tag, with “Ignore RFID tag
error” omitted
<A>
<V>50<H>50<BD>3020654912345678904
<RK>1,d13,34393132333435363738393034,ict:01
<Q>2
<Z>
[Coding sample7] (data format set to ASCII)
In case where 13 bytes characters [4912345678904] is recorded to RFID tag of MIFARE UItralight
from block of user memory 5 , with “Ignore RFID tag error” omitted
<A>
<V>50<H>50<BD>3020654912345678904
<RK>1,D13,4912345678904,ict:30,wsb:5
<Q>1
<Z>
Memory data after execution