SATO CL4NX - Page 550

548
No. Description Device information name Device information data
3 Main firmware version MAIN FW Ver V...V
V: Version
4 Main firmware Creation date MAIN FW Date YYYYMMDD_HHMMSS TTT
T: Time zone
5 Printer module Boot firmware
Version
MODULE BOOT FW Ver P…P.boot-V.V.V-S…S
P: Platform name
V: Version
S: Release = Release version
Alpha/Beta = Test version
xxxuser = Custom version
urgent = Urgent version
6 Printer module Boot firmware
Creation date
MODULE BOOT FW Date YY.MM.DD
7 Printer module Boot firmware
Check sum
MODULE BOOT FW
CHECKSUM
CCCC
C: Check sum
8 Printer module Main firmware
Version
MODULE MAIN FW Ver P...P.main-V.V.V-S...S
P: Platform name
V: Version
S: Release = Release version
Alpha/Beta = Test version
xxxuser = Custom version
urgent = Urgent version
9 Printer module Main firmware
Creation date
MODULE MAIN FW Date YY.MM.DD
10 Printer module Main firmware
Check sum
MODULE MAIN FW
CHECKSUM
CCCC
C: Check sum
11 PLD version of CONT board CONT PLD Ver VV
V: Version
12 PLD version and FPGA version
of interface board
INTF PLD/FPGA Ver V
1
V
1
/V
2
V
2
V
1
: PLD Version
V
2
: FPGA Version
13 LAN MAC Address LAN MAC XX:XX:XX:XX:XX:XX
X: Alphanumeric
14 WLAN MAC Address WLAN MAC XX:XX:XX:XX:XX:XX
X: Alphanumeric
15 BD Address BD xxxxxxxxxxxx
X: Alphanumeric
16 Head counter 1 Head Count1 Numeric value (unit: mm)
17 Head counter 2 Head Count2 Numeric value (unit: mm)
18 Head counter 3 Head Count3 Numeric value (unit: mm)
19 Life counter Life Count Numeric value (unit: mm)
20 Cutter counter Cut Count Numeric value (unit: count)
21 Dispense counter Disp Count Numeric value (unit: 1/24 mm)