SATO CL4NX - Page 558

556
No. Description Printer status
information name
Printer status information data
2 Receive buffer status RS 0: Buffer available
1: Buffer near full
2: Buffer full
3 Ribbon status
* Monitoring can be performed during
printing and feeding.
The correct value cannot be
acquired when the operation has
stopped.
RE 0: Ribbon present
1: Ribbon near end
2: No ribbon
3: Direct thermal model
4 Media status
* Monitoring can be performed during
printing and feeding.
The correct value cannot be
acquired when the operation has
stopped.
PE 0: Media present (including during startup)
1: Label near end
2: No media
5
Error No.
*1
EN 00: Online *Not an error. Return is
performed
01: Offline *Not an error. Return is
performed
02: Machine error
03: Memory error
04: Program error
05: Setting information error (FLASH-
ROM error)
06: Setting information error (EE-PROM
error)
07: Download error
08: Parity error
09: Over run
10: Framing error
11: LAN timeout error
12: Buffer over
13: Head open
14: Paper end
15: Ribbon end
16: Media error
17: Sensor error
18: Printhead error
19: Cover open error
20: Memory/Card type error
21: Memory/Card read/write error
22: Memory/Card full error
23: Memory/Card no battery error
24: Ribbon saver error
25: Cutter error
26: Cutter sensor error
27: Stacker full error
28: Command error
29: Sensor error at Power-On