SATO CL4NX - Error Message 1009 (Ribbon End)

707
CL4NX
Trap
Printer MIB Host Resources MIB
# Alert Description
prtAlertSeveri
tyLevel
prtAlertTraini
ngLevel
prtAlertGroup prtAlertCode
hrPrinterDete
ctedErrorStat
e
hrDeviceStat
us
hrPrinter
Status
90 guiWarning_paperNearEnd Paper near end X warning(4) untrained(3) input(8)
inputMediaSupp
lyLow(807)
bit #0
(lowPaper)
91
guiWarning_receiveBufferNea
rFull
Receive buffer near full X warning(4) other(1) channel(14) other(1) -
92 guiWarning_ribbonNearEnd Ribbon near end X warning(4) untrained(3)
markerSupplies
(11)
markerPrintRib
bonAlmostEmpty
(1106)
bit #2
(lowToner)
93 guiWarning_unknownHead Unknown head X warning(4)
fieldService(5
)
marker(10) other(1) -
94 mStatus_error Offline and error X critical(3) untrained(3)
generalPrinter
(5)
subunitOffline
(22)
bit #6
(offline) |
bit #7
(serviceReque
sted) down(5) other(1)
95 mStatus_online|mStatus_aep Online - - - - - - running(2) /
warning(3) *
idle(3) /
printing(
4) **
96 mStatus_offline Offline X critical(3) untrained(3)
generalPrinter
(5)
subunitOffline
(22)
bit #6
(offline) down(5) other(1)
97 mStatus_powerDown Power down - - - - - -
down(5) other(1)
98 mStatus_init Initializing - - - - - -
down(5) warmup(5)
99 mStatus_upgrading Upgrading - - - - - -
down(5) other(1)
100 mStatus_powersave Power Saving Mode - - - - - -
running(2)|w
arning(3)|do
wn(5) *** other(1)
101 mStatus_wakeup Waking up from Power Saving Mode - - - - - -
running(2)|w
arning(3)|do
wn(5) *** warmup(5)
* warning(3) is set in case of an active warning (guiWarning_xxx), else running(2) is set.
** printing(4) is set while printing a label, else idle(3) is set.
*** running(2) or warning(3) is set (see *) if the printer will wake up to the online state (mStatus_online), else down(5) is set.