SATO S84 ex - Page 106

6 Installation of Options
104
S84-ex/S86-ex Service Manual
5 Turn the head lock lever  clockwise to
unlock the print head.
CAUTION
• The print head and its surroundings are hot after
printing. Be careful not to touch it, to avoid being
burned.
• Touching the edge of the print head with your bare
hand could cause injury.
6 Remove the thumbscrew  attached to
the cover  on top of the print head
assembly. Remove the cover  and
place it aside.
7 Push the pressure roller release tab up
to release the pressure roller plate .
8 Remove the thumbscrew  attaching
the pressure roller plate  to the
printer.
Remove the pressure roller plate  and place
aside.
9 Pull the tab  to remove the print
head .
Support the print head with your hand when the
print head is released.
10 Pull out the print head  and disconnect
two connectors  from the print
head .
CAUTION
Handle the print head with care.
Do not contaminate or scratch the sensitive print head
surface.
4
5
6
7
8
9
10
11