SATO S84 ex - Appendix; Conditions for Use with Support Structure;Applicator; Media Forward Feed Force; Media Allowable Load

6 Installation of Options
111
S84-ex/S86-ex Service Manual
34 Paste five stickers to the position as shown.
• Paste the SATO RFID solutions sticker  on the front of the printer as shown above.
• Paste the patent label
 and wireless sticker  on the inner surface of the top cover as shown
above.
• Paste the FCC sticker
 on the inner surface of the top cover as shown above.
• Paste the serial no. sticker
 on the inner surface of the rear cover as shown above.
33
10 mm (0.4”)
10 mm
(0.4”)
15 mm (0.6”)
29
30 31
32
15 mm (0.6”)
Printer Front Printer Rear
Inner Surface of the Top Cover
10 mm (0.4”)
10 mm (0.4”)