SATO S84 ex - Page 24

2 Operation and Configuration
22
S84-ex/S86-ex Service Manual
IGNORE CAN/DLE NO (When STATUS4, MULTI is
selected in IEEE1284)
Yes
SNTP FUNCTION DISABLE No
IPv4/6 select IPv4 Yes
NTP IPv4/IPv6 ADDRESS IPv4: 0.0.0.0
IPv6: 0:0:0:0:0:0:0:0
No
TIME ZONE 00:00 No
ERROR NOTICE DISABLE No
SNMP FUNCTION DISABLE -
SNMP COMMUNITY NAME public Yes
SNMP COMMUNITY WRITE DISABLE Yes
SNMP USER NAME Null Yes
SNMP AUTH PROTOCOL NONE Yes
SNMP AUTH KEY Null Yes
SNMP PRIVACY PROTOCOL NONE Yes
SNMP PRIVACY KEY Null Yes
SNMP USER MIB WRITE DISABLE Yes
TRAP TYPE SELECT SNMPv2c Yes
TRAP DISABLE Yes
TRAP COMMUNITY NAME Null Yes
TRAP USER NAME Null Yes
TRAP AUTH PROTOCOL NONE Yes
TRAP AUTH KEY Null Yes
TRAP PRIVACY PROTOCOL NONE Yes
TRAP PRIVACY KEY Null Yes
TRAP IPv4/6 SELECT IPv4 Yes
TRAP IPv4/IPv6 ADDRESS IPv4: 0.0.0.0
IPv6: 0:0:0:0:0:0:0:0
Yes
Setting Item Initial Value
Default Setting
(Dot Density Change)