99
Persistence of
the command
When printer is powered off
Set parameter will not be retained
Becomes invalid after execution
Becomes invalid after the job
[Function]
Specifies MAXI Code.
[Format] (Setting portion)
<2D20>,a(,bbb,ccc,d~d)
●Parameter
a Mode = 2 : Delivery (Numeric only)
3 : Delivery (Alphanumeric)
4 : Standard symbol
6 : for Reader device only
The following parameters shall be specified when mode [2] or [3] is selected. Omit the following if selection is [4] or [6].
b Service class = Valid range : 001 to 999 (Numeric)
c Country code = Valid range : 001 to 999 (Numeric)
d Postal code = Valid range : 0 to 999999999 (Mode2)
000000 to 999999 (Mode3)
Mode 2 accepts max. 9digits numeric only
Mode 3 accepts 6digits only (Upper case only for alphabet)
[Format] (Data portion)
<DN>mmmm,n~n
●Parameter
m Quantity of data = Valid range : 1 to 138
n Print data = Data
* 00H cannot be specified
3digits Fixed
(Numeric only)
3digits Fixed
(Numeric only)
6 digits fixed
(Alphanumeric)
[Coding Example] Mode: Delivery (Numeric only), Service Class: 003, Country code: 081
Postal code: 123456789
<A>
<V>100<H>200<2D20>,2,012,840,122290196
<DN>0057,[)>[RS]01[GS]961Z00000333[GS]UPSN[GS]1W74V3[GS]318[GS][GS]1/1[GS]2[GS]N
[GS][GS]ALBANY[GS]NY[RS][EOT]
<Q>2
<Z>
[Notes]
1. The size of the symbol printed is not subject to data volume. (Quantity of data)
2. Any other parameters specified or settings being inconsistent with each other will result in no printing.
3. In case mode [4] or [6] is selected, be sure to have data size (in byte) larger than 12 (bytes), smaller data volume will result in
failure of scanner-reading.
4. In mode2 and 3, data has following definition. See “MAXI Code data format (Mode2 and 3)”.
To Next Page
Loading...
