SATO WS412DT - ESC+TK Forced Tear off

203
System
Applicable for
WS4 series
ESC+TK Forced Tear off
ESC+TK
Hex code
ESC
TK
Parameter
<1B>16
<54>16<4B>16
None
Default setting
None
Persistence of the
command
When printer is powered off
Set parameter will be retained
Validity in a job
Retained until next valid setting
Validity after a job
Retained until next valid setting
[Function]
Executes Tear off compulsory.
[Format]
<TK>
[Coding example]
<A>
<TK>
<Z>
[Notes]
1. This command can be specified only in Tear off mode.
2. With this command, the printer executes Tear off motion without waiting the time set by command <TW>. If the next data is received
before Tear off motion, Tear off is executed compulsory.
3. This command can not be used in combination with other commands.
[Tips]
1. This command can be used to save the time set by command <TW>, if it is sure that there is no following item.
Forced Tear off