SATO WS412DT - ESC+I3 LAN Interface

197
System
Available for
WS4 series
ESC+I3 LAN interface
ESC+I3
Hex code
ESC
I3
Parameter
<1B>16
<49>16<33>16
a
Default setting
a=0
Persistence of
the command
When printer is powered off
Set parameter will be retained.
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Specifies the setting of LAN Interface.
[Format]
<I3>a
●Parameter
a [LAN mode] = 0 : 2 port connection/unsolicited (for driver protocol (STATUS4))
1 : 2 port connection /solicited by ENQ (for driver protocol (STATUS4))
2 : 1 port connection /solicited by ENQ (STATUS3)
[Coding Example]
<A>
<I3>0
<Z>
[Notes]
1. The set parameter by this command will become valid after rebooting.
LAN Interface