SATO WS412DT - ESC+* Clear Memory

181
System
Available for
WS4 series
ESC+* Clear Memory
ESC+*
Hex code
ESC
*
Parameter
<1B>16
<2A>16
a
Default setting
None
Persistence of
the command
When printer is powered off
Set Parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Clears print jobs and specific item in memory.
[Format]
<*>a
●Parameter
a [Item to be cleared] = Not specified : Single item buffer, Edit buffer (reprint is not possible)
: Multi item buffer, Edit buffer (Clears job which is in parsing)
T : User defined characters
& : Form overlay
X : All clear
(Receive buffer, Edit buffer, User defined characters, form overlay)
* The job ,which is currently in progress, will not be cleared
[Coding Example1] Clear receive and edit buffer
<A>
<*>
<Z>
[Coding Example2] All clear
<A>
<*>X
<Z>
[Coding Example3] Clear user-defined characters
<A>
<*>T
<Z>
[Notes]
1. Set this command between Start code<A> and Stop code<Z>.
2. This command<*>(a=X) will clear all the data sent before the command. However, the data which is completely parsed before the
command will not be cleared. X will also clear user-defined characters and form overlay.
[Tips]
1. After the command <*> is executed, have an interval of more than 100ms before sending next print data.
2. The job in printing will not be terminated by the command <*>.
Clear Memory