SATO WS412DT - Esc+D~Esc+D Barcode (HRI Font)

67
Barcode
Available for
WS4 series
ESC+D~ESC+d Barcode (HRI Font)
ESC+D ~
ESC+d
Hex code
ESC
D~+ ESC+d
Parameter
<1B>
16
<44>
16
~<1B>
16
char. type
abbcccn~n+<d>n~n
Default setting
None
Persistence of
the command
When printer is powered off
Set parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Specifies character type of human readable interpretation (HRI) for barcode.
[Format]
<D>abbcccn~n + <d>n~n
● Parameter
a [Barcode type] = 3 : JAN/EAN13
4 : JAN/EAN8
H : UPC-A
b [Narrow bar width] = Valid range : 01 to 12 dots
c [Barcode height] = Valid range : 001 to 999 dots
n [Print data] = Barcode data
d [Character type] = XU
XS
XM
XB
XL
OA
OB
U
S
M
WB
WL
n [Print data] = HRI data
[Coding example] Barcode type: JAN/EAN-13, Narrow bar width: 02, Barcode height: 120,
Barcode data: 4902471006795, Character type: XS, HRI data: 4902471006795
<A>
<V>100<H>200
<D>3021204902471006795
<XS>4902471006795
<Q>2
<Z>
[Notes]
1. Adds HRI characters in specified font.
2. When the data other than specified value is set, printing will not be performed. When barcode enlargement ratio is small and
character type is large, HRI text may be overlapped with each other.
3. Printer will lay out HRI properly.
4. The barcode translation of following codes will be restricted to conditions below: JAN/EAN8, JAN/EAN13, UPC-A
In case of 8 dots/mm (203dpi) : Appropriate Narrow bar width is [02], [03]
In case of 12 dots/mm (305dpi) : Appropriate Narrow bar width is [03], [04]
Barcode (HRI Font)