SATO WS412DT - ESC+GR Recall Graphic

216
Memory Card
Available for
WS4 series
ESC+GR Recall Graphic
ESC+GR
HEX code
ESC
GR
Parameter
<1B>16
<47>16<52>16
aaa
Default setting
None
Persistence of the
command
When printer is powered off
Set parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Recalls and prints the graphic image stored by the Store Graphic <GI> command.
[Format]
<GR>aaa
● Parameter
a [Registration number] = 1 to 999
[Example]
<A>
<V>100<H>100
<CC>1
<GR>1
<Q>1
<Z>
[Note]
1. The Start Point Correction <A3> command will be ignored.
2. The Rotate <%> and the Character Expansion <L> commands can be used for the recalled graphic image.
3. The Card Slot <CC> command must be sent prior to this command.
Recall Graphic