SATO WS412DT - ESC+BT Barcode Ratio

70
Barcode
Available for
WS4 series
ESC+BT Barcode Ratio
ESC+BT
Hex code
ESC
BT
Parameter
<1B>
16
<42>
16
<54>
16
abbccddee
Default setting
None
Persistence of
the command
When printer is powered off
Set parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Specifies the ratio of the narrow gap in regard to the wide gap.
[Format]
<BT>abbccddee
● Parameter
a [Barcode type] = 0 : CODABAR (NW-7)
1 : CODE39
2 : ITF
5 : Industrial 2of5
6 : Matrix 2of5
b [Narrow space] = Valid range : 01 to 99 dots
c [Wide space] = Valid range : 01 to 99 dots
d [Narrow bar} = Valid range : 01 to 99 dots
e [Wide bar] = Valid range : 01 to 99 dots
[Coding example 1] Barcode type: CODE39, Narrow space: 03, Wide space: 06, Narrow bar: 03, Wide bar: 06
<A>
<BT>103060306
<V>100<H>200<BW>01233*ABCD*
<Q>2
<Z>
[Notes]
1. To print barcode with specified ratio, insert “Barcode print by specified ratio” command <BW> after this command.
2. When <BW> and the Print Quantity <Q> command are not specified, only the registration of bar width ratio of narrow and wide
bars will be performed.
3. Only one ratio can be registered.
4. If the data other than specified is set, this will not be registered due to command error.
Barcode Ratio