SATO WS412DT - ESC+V Vertical Print Position

16
Print Position
Available for
WS4 series
ESC+V Vertical Print Position
ESC+V
Hex code
ESC
V
Parameter
<1B>
16
<56>
16
aaaa
Default setting
aaaa=1
Persistence of the
command
When printer is powered off
Command settings will not be retained
Validity in a job
Set parameter will be retained until next valid setting
Validity after a job
Set parameter will be the default value for the next job <A>
[Function]
Specifies vertical print position in dots from the origin position
[Format]
<V>aaaa
● Parameter
a [Vertical print position] = Valid range : refer to table below
[Coding example] Vertical print position: 100 dots
<A>
<V>100<H>200<P>2<L>0202<OA>ABCD
<Q>2
<Z>
[Notes]
1. Defines starting position of print for the following: Characters, barcodes, ruled lines, graphics, etc.
[Parameter, default setting and validity range]
Model
Default
Range (dots)
Standard printable area
WS408
1
1 ~ 7992
WS412
1
1 ~ 11988
[Tips]
1. Data outside of the print range (such as characters, barcodes and graphics) will be clipped.
[Valid commands]
WS4 series
Font
<XU>
<XS>
<XM>
<XB>
<XL>
<U>
<S>
<M>
<WB>
<WL>
<OA>
<OB>
<RD>
<$=>
Barcode
<B>
<BC>
<BG>
<BI>
<BF>
<BP>
<D>
<D><d>
<BD>
<BT>
<BW>
2D code
<BK>
<BQ>
<BV>
<BX>
<2D10>
<2D12>
<2D20>
<2D30>
<2D31>
<2D50>
<2D51>
Modification
<WD>
<FW>
<(>
Graphic
<G>
<GM>
<GP>
Vertical Print Position