SATO WS412DT - 1 Introduction; 2 Default Settings

1
1. Introduction
This document includes the command specifications of the WS4 series.
(1) WS408DT: Head density 203(dpi) / Direct thermal printer
(2) WS408TT: Head density 203(dpi) / Thermal transfer & Direct thermal printer
(3) WS412DT: Head density 300(dpi) / Direct thermal printer
(4) WS412TT: Head density 300(dpi) / Thermal transfer & Direct thermal printer
Command language used in this document is based on the SBPL(SATO Barcode Printer Language).
2. Default Settings
Default setting of the printers are listed below.
WS4 series
Item
Range
Default
Print speed
2-6 ips (203 dpi), 2-4 ips (300 dpi)
5 ips (203 dpi), 4 ips (300 dpi)
Darkness range
A, B
A (fixed)
Print darkness
1-5
3 (DT), 2 (TT)
Pitch offset
[-99, 99]
+0
Zero slash
w/ zero slash, w/o zero slash
w/o zero slash
Proportional/Fixed pitch
Propotional pitch, fixed pitch
Propotional pitch