212
Persistence of the
command
When printer is powered off
Set parameter will be retained
Retained until next valid setting
Retained until next valid setting
[Function]
Stores a format field description in the Store Format <YS> command.
[Format]
</N>,aa,bb
●Parameter
a [Field number] = 1 to 99
b [Print digit number] = 1 to 99
[Coding example]
<A>
<CC>1
<YS>,1
</N>,1,3
<%>0<V>100<H>200<P>2<L>0101<XM>,ABC
</N>,2,5
<%>0<V>200<H>200<P>2<L>0101<OA>12345
</N>,3,8
<%>0<V>300<H>40<B>40208049123456
<Z>
[Notes]
1. Specify the field number in ascending order.
2. Specify the <V> and <H> position commands for each field. If not, default value will be set.
3. Specification of digit number when printing external characters.
For an external character code “H”,1 external character has 4 digits; thus, the print of 3 characters will be 12 digits.
For an external character code “B”, 1 external character has 2 digits; thus, the print of 3 characters will be 6 digits.
4. Use this command in conjunction with the Store Format <YS> command.
5. Due to the memory capacity limit, it may not save up to 99 registries.
[Valid Commands for the Change of Print]
WS4 series
To Next Page
Loading...
