SATO WS412DT - Powering the Printer On and Off

19
Modification
Available for
WS4 series
ESC+PS Proportional Pitch
ESC+PS
Hex code
ESC
PS
Parameter
<1B>
16
<50>
16
<53>
16
None
Default setting
None
Persistence of the
command
When printer is powered off
Command settings will not be retained
Validity in a job
Will be retained until next valid setting
Validity after a job
Will be retained after the job
[Function]
Defines proportional pitch
[Format]
<PS>
[Coding example]
<A>
<PS>
<V>100<H>200<P>2<L>0202<XU>ABCD
<Q>2
<Z>
[Notes]
1. When setting proportional pitch <PS>, alphanumeric will have narrower pitches among characters than if not specified.
2. If the setting is done outside of the possible range, the proportional print will not be performed.
3. The default setting is set to [Proportional pitch].
[Valid commands]
WS4 series
Font
<XU>
<XS>
<XM>
<XB>
<XL>
<RD>
<$=>
Modification
<RF>
Proportional Pitch