SATO WS412DT - ESC+; Recall Form Overlay

26
Modification
Available for
WS4 series
ESC+/ Recall Form Overlay
ESC+/
Hex code
ESC
/
Parameter
<1B>
16
<2F>
16
None
Default setting
None
Persistence of
the command
When printer is powered off
Command settings will not be retained
Validity in a job
Will be retained until next valid setting
Validity after a job
Will be retained until next valid setting
[Function]
Specifies to invoke form overlay
[Format]
</>
[Coding example]
<A>
</>
<V>200<H>100<P>0<$>B,100,100,6
<$=>SATOPRINTER
<V>720<H>150<B>102100*95000012345*
<Q>2
<Z>
[Notes]
1. This command invokes the form-overlay, saved by the form-overlay registration <&> command.
2. If detecting this command in a normal print data, this data will be combined with a graphic saved in the form overlay for printing out.
Recall Form Overlay