SATO WS412DT - Page 213

207
In general, this command is used for registration number only. By specifying the horizontal and vertical window sizes, the label image can be
moved by using the <V> and <H> position commands when recalling the label image. If the repositioned label image exceeds the printable area,
the image will be truncated.
See the following examples.
(1) Normal operation
<A>
<V>100<H>100<P>2<L>0202
<XM>0ABCD
<V>60<H>60
<FW>0808V800H400
<V>320<H>60
<FW>04H400
<CC>1
<&S>,1
<Z>
(2) When print is specified after the <&S> command.
<A>
<V>100<H>100<P>2<L>0202
<XM>0ABCD
<V>60<H>60
<FW>0808V800H400
<V>320<H>60
<FW>04H400
<CC>1
<&S>,1
<V>200<H>100<OB>12345
<Z>
(3) When window size is specified.
Media size specification <A1>08000400, Horizontal size of window: 200, Vertical size of window: 200
<A>
<A1>08000400
<V>100<H>00<P>2<L>0202
<XM>0ABCD
<CC>1
<&S>,1,200,200
<Z>
[Range for horizontal size of window] [Range for vertical size of window]
Resolution
Valid range (dots)
8 dots/mm
1 to 832
12 dots/mm
1 to 1248
Resolution
Valid range (dots)
8 dots/mm
1 to 2400
12 dots/mm
1 to 3600
Stored label image
Anything specified prior to the <&S> command
will be stored as form overlay
Label feed direction
A
B
C
D
400dots
800dots
200dots
200dots
Will be printed.
Only this area will be stored.
ABCD