Safety and Functional Tester GLP2-i/e
During the test, test object and test leads must not be touched!
The safety measures required by law must be adhered to!
Schleich GmbH * D-58675 Hemer * 0049 / (0)2372 / 9498-0 * 0049 / (0)2372 / 9498-99 *
http://www.schleich.com * info@schleich.com 74
Measured value that is evaluated and indicated
t
R
Start Ende
If the measuring value varies during the PE resistance test, the highest value that occurred within the
measuring time is evaluated and indicated.
4-wire measurement
To Next Page
Loading...