Translation of Original Operating Instructions
Airport Sweeper / Airport Stand Cleaner
2017-02-02 103
Item Designation Checks
4 Fan
Check impeller wheel and housing for damage
caused by foreign objects.
5 Hydraulic tank
Oil level: Display on the tank
Low oil indicator: Note display on screen.
7 Leaks
Hydraulic system
8 Disc brushes
Check bristle wear (min. 60 mm).
Check contact pressure.
9 Pick-up unit
Check diverse settings
Check screw and bolt fittings, tighten and fasten
if necessary.
10 Cylindrical brush
Check sweep range and bristle wear
11 Air filter (D3)
Note soiling display on screen.
13 Pneumatic system
Check system for leaks.
Drain the compressed air tank in winter operation.
14 Water tank
Check water level using the indicator on the
display.
15 Water nozzles
Check functionality
16 Path marking with foam
Check the hopper fill level and the foam nozzle
to see that they work.
17 Hydraulic system for front-
mounted machine
Single-circuit hydraulic system:
Oil level (dip stick)
Dual-circuit hydraulic system:
Oil level (indicator on tank)
Oil filter contamination (contamination indicator)
Running noise when pump is being driven
(drive shaft)
18 Central lubrication unit
Check the grease level in the lubricant reservoir
19 Mirrors
Check that the mirrors are properly adjusted.
Danger areas must be able to be viewed.
20 Safety equipment
Check of the safety equipment
21 Carry out functionality test.
Fan, pick-up unit, cylindrical brushes etc.
22 Maintenance work
Check to see that maintenance work that
workshop staff were to carry out has been
completed.
23 Water pump, high-pressure
water pump
Check fill level
To Next Page
Loading...