Translation of Original Operating Instructions
Airport Sweeper / Airport Stand Cleaner
2017-02-02 139
20.6 Cleaning the water filter
Parking the machine safely
Close the ball valve (1).
Unscrew the filter holder (2).
Remove the filter (3), wash it out filter
with clean water and blow it out with
compressed air.
Insert the filter into the housing (4).
Tighten the filter holder by hand.
20.7 Cleaning the machine
WARNING
Injury from sharp-edged objects, hazardous
substances or bacterially contaminated road
surface or organisms
► Wear safety gloves and spray protection
for face and body
NOTE
Machine parts can get damaged. Do not direct
the water stream towards electrical, hydraulic,
bearing and joint components.
The spraying hose can be used to clean parts of
the machine, e.g. (when the hopper is open) the
filter, the dirt screen, the hopper door closing
edges etc.
20.7.1 Cleaning the machine with high-
pressure cleaner
WARNING
Injury due to high pressure water
► Only aim water spray at the working area,
never at people or animals.
► When turning on the lance, hold tight and
resist pressure jolts.
► Stop working immediately if people enter
the danger area, and stop the machine
► Beware of debris and pieces of material that
can be pushed away by the high pressure
hose.
► Wear face protection
1
To Next Page
Loading...