Schmidt AS 990 - Maintenance and repair work that may only be carried out by workshop personnel

Translation of Original Operating Instructions
Airport Sweeper / Airport Stand Cleaner
2017-02-02 143
21 Maintenance and repair work that may
only be carried out by workshop
personnel
DANGER
Damage when the machine is running
► Wear hearing protection and tight fitting
clothes
► Block access to danger zones using suitable
measures
DANGER
Injury
► Maintenance work is only to be performed
in suitable workshops
► The necessary tools and equipment
(e.g. lifting platforms, service platforms, etc.)
must be present
► Workshop personnel must be suitably trained
and skilled for working on the machine
DANGER
Rolling over and crushing
► Ensure that no one is standing in the danger
area.
DANGER
Risk prevention before working on the machine
► Turn off the vehicle engine and auxiliary
engine
► Remove the ignition key for the vehicle
and auxiliary engine.
► Bring the pick-up unit and disc brushes
into the transport position and secure them
► For the snow plough, see separate operating
instructions
► Engage the handbrake
► Turn off the control panel to control the
machine.
► Place wheel chocks under both wheels of
one axle so that the machine cannot roll away
DANGER
Accident
► Any alterations, additions or modifications
that may compromise the vehicle's safety
must first be approved by Aebi Schmidt.
This is also applicable to programmable
control systems, settings in safety equipment
and welding on load-bearing carrying parts.