Translation of Original Operating Instructions
Airport Sweeper / Airport Stand Cleaner
2017-02-02 35
7 Parts description
7.1 Control panel
The control panel is integrated into the driver's cab
of the machine.
The control panel should be adjusted using the
adjustable control panel mounts so that the operator
has a good view of the display and does not get
tired when operating the switches and buttons.
Parameters can be defined on the control panel
by our Aebi Schmidt customer service personnel
so that the direction of the joystick corresponds with
the movements of the machine. Various functions
and values that can be adjusted or controlled via
the control panel can be enabled or disabled by
Aebi Schmidt customer service upon request.
It is normally a good idea to only enable the
functions that are required for operation.
This greatly decreases the chances of operational
mistakes being made by the operator.
Functions that are only to be performed by the
workshop personnel with the appropriate training
and instruction are password protected.
Access to machine-specific parameters is also
protected with a separate password. This area is
only to be accessed, changed, evaluated or deleted
by Aebi Schmidt customer service personnel.
7.2 Hand-held control panel
NOTE
Destruction of the suction hoses
► Lift the hopper only when the pick-up unit
is lifted
Using the hand-held control panel, the hopper
can be raised, lowered and the hopper door can
be opened or closed, as well as the optional
functionality of performing the quick-change
for the suction assembly.
The vehicle engine and the auxiliary drive must
be switched on
To Next Page
Loading...