Schmidt AS 990 - Path Marking; Path Marking with Water Jet; Path Marking with Foam Peaks

Translation of Original Operating Instructions
Airport Sweeper / Airport Stand Cleaner
2017-02-02 60
7.19.4 Path marking
7.19.5 Path marking with water jet
When the water system is switched on, the water
nozzle (1) switches on automatically. The water
supply can be interrupted with the water valve (2)
in the container box (here, water flow switched on).
7.19.6 Path marking with foam peaks
The path-marking peaks are made from a mixture
of foaming agent, water and air. The markers are
forced out through the foam nozzle (2).
Fill the foaming agent container (1).
 Tip the debris hopper.
 Open the canister cover and fill it with the foaming
agent.
Commissioning:
 Switch on the track marking with the control
panel.
1
1
2