Schmidt AS 990 - Vehicle requirements for mounting the AS 990

Translation of Original Operating Instructions
Airport Sweeper / Airport Stand Cleaner
2017-02-02 34
5.3 Avoiding noise and vibration
5.3.1 Preventing noise
It is possible to avoid or lower noise by reducing
the blower output. The leads to the sweeping and
blowing power being reduced accordingly.
5.3.2 Preventing vibrations
It is possible to avoid or lower vibration by reducing
the sweeping speed. The leads to the sweeping
power being reduced accordingly.
5.4 Machinery Directive
Conformance to the requirements of the directives
2006/42/EC, 2000/14/EC
The following standards were observed in its design
and manufacture:
● DIN EN ISO 12 100:2011
● DIN EN ISO 13857:2008
● DIN EN ISO 13850:2016
● DIN EN ISO 13732-1:2008
● DIN EN 1679-1: 2011
● DIN EN ISO 4413: 2011
● DIN EN 13 019: 2009
6 Vehicle requirements for mounting
the AS 990
Equipment according to specification