Translation of Original Operating Instructions
Airport Sweeper / Airport Stand Cleaner
2017-02-02 123
14.2 Quick-change procedure of front-
mounted machines
Observe the operating instructions for the
attachment. The quick change process is described
in these operating instructions. The "Lower with
pressure" function must be performed for the
changing procedure.
14.2.1 Lower front-mounted machine with
pressure
NOTE
The device is lowered with pressure for a quick
change.
This function may not be used during clearing
operations. The machine will be damaged.
TIP
The auxiliary engine does not need to be started
to control the attachment. The ignition to start
the attachment motor must be switched on.
Switch to level 1 as described under Menu.
Switch on the ignition of the auxiliary engine.
Button (2) is preselected or press.
The quick release procedure is preselected.
The symbol (3) appears on the display.
Carry out the quick change with the joystick (4).
Observe the symbol (5) indicating the joystick
direction.
UP
DOWN
4
3
5
To Next Page
Loading...