Translation of Original Operating Instructions
Airport Sweeper / Airport Stand Cleaner
2017-02-02 42
7.10 Electrical system
Movement control functions are carried out via
a PLC controller.
The lighting system is state of the art.
The machine is fitted with two EMERGENCY
STOP switches (1):
Hopper rear right (2).
Control panel (3)
7.10.1 Control cabinet
(1): Fuses (see table below for description)
(2): Relay bar
(3): Diagnostics connector (for customer service
only)
(4): PLC interface
(5): Pre-fusing for 2X 30A assembly
(6): Plug-in connector for plugging the control panel
in (customer service only)
(7): Limit switch: The hopper can only be lowered
when the control cabinet is closed.
(8): IO Modules
(9): Computer
(10): Engine controller ADM 2
(11): PLC programming switch
(12): Main relay
1
2
3
4
5
6
7
89
10
11
12
To Next Page
Loading...