EasyManua.ls Logo

Schmidt AS 990 - Controlling front-mounted machine

Schmidt AS 990
180 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Translation of Original Operating Instructions
Airport Sweeper / Airport Stand Cleaner
2017-02-02 85
8.5.20 Controlling front-mounted machine
e.g. snowplough, magnetic beam
DANGER
People can be caught between the attachment
and the vehicle. The attachment can only be
moved if the danger zone can be seen.
The attachment may not be moved if there are
people in the danger zone.
NOTE
Damage to castor wheels
Lift the snow plough before swivelling
TIP
The auxiliary engine does not need to be started
to control the attachment. The ignition to start
the attachment motor must be switched on.
8.5.20.1 Manual operation
During manual operation, the joystick is to be held
in the functional direction of the attachment until
the end position has been reached.
Start the vehicle engine and switch on the
ignition of the attachment motor.
Press the button (1). The "Manual control"
symbol is illuminated in green.
The attachment can be controlled
(raised/lowered and pivoted) with the joystick (2).

Table of Contents