Translation of Original Operating Instructions
Airport Sweeper / Airport Stand Cleaner
2017-02-02 146
1 Manufacturer’s code
3 Year of manufacture (e.g., 1999)
2 Month of manufacture (e.g., October)
4 Maximum permitted operating pressure
(e.g., 345 bar)
Any special equipment required for particular
tasks must be used. Objects lodged in the
brushes must only be removed with a tool
(e.g. chip-removal tool) or protective gloves.
Manually operating the hydraulic solenoids in the
case of an emergency can result in dangerous
movements. Appropriate safety measures must
be made before any such work is undertaken.
Dispose of all oil, fuel and filters appropriately
after doing any maintenance work. Larger plastic
parts are recyclable and are marked accordingly.
NOTE
Exposed bearings are to be oiled or greased
carefully when required. Dirt sticks to exposed
oil and grease and can irreparably damage
bearings. Remove all exposed oil or grease
21.2 Lubricants
Recommended lubricants
Lubricants
named in
maintenance
schedule
Start temperature of
max. -25°C
NATO code
Hydraulic oil ATF SUFFIX A O-1178
Universal oil 15W 40 O-236
Lubricant for
grease nipples
Multi-
purpose
grease
K2 K20 DIN 51825 T.1 G-421
Lubrication
via central
lubrication unit
Multi-
purpose
grease
NiGL 00 fluid grease
or
Fluid grease NiGL 0
Ein Unternehmen der Aebi Schmidt Grupp
To Next Page
Loading...