Schmidt AS 990 - Lubrication and maintenance schedule; Notes on lubrication via a central lubrication unit

Translation of Original Operating Instructions
Airport Sweeper / Airport Stand Cleaner
2017-02-02 148
21.4 Lubrication and maintenance
schedule
21.4.1 Notes on lubrication via a central
lubrication unit
NOTE
Follow the instructions in the manufacturer's
operating instructions for the central lubrication
unit.
The central lubrication unit supplies the lubrication
points that are normally supplied through a grease
nipple.
Lubrication points that are located on rotating
machine parts must usually be greased manually
via the grease nipples.
TIP
The central lubrication unit will only function
when the machine ignition is switched on.
Central lubrication unit maintenance.
Check the lubricant level in the grease reservoir
daily. Refill the reservoir if necessary. A functional
test must be carried out after 25 operating hours.
The button on the pump housing can be actuated
at any time to activate intermediate greasing to
check the lubrication supply to the respective
bearing-points.
NOTE
The lubrication points marked in grey in the
lubrication schedule are supplied via the central
lubrication unit.
21.4.2 Snowplough
See separate operating instructions