Schmidt AS 990 - Filling the cleaning agent tank

Translation of Original Operating Instructions
Airport Sweeper / Airport Stand Cleaner
2017-02-02 137
20.5.1 Filling the cleaning agent tank
DANGER
Injuries due to cleaning agent
► Avoid breathing in and swallowing the
cleaning agent, as well as contact with
the skin, eyes, etc.
See the manufacturer's specifications
NOTE
Damage to cleaning and water system
► Completely empty both systems in case of
a danger of frost
NOTE
Expiration of the warranty
► Cleaning agent (detergent) "BioVersal FW"
from BioVersal is approved by Aebi Schmidt
to prevent corrosion of the hopper and
fixtures.
Filling the cleaning agent tank (version 1)
 Unscrew the cap (1) on the C connection.
 Connect the filling hose.
 Fill the cleaning agent tank slowly.
 Visually monitor the filling process continually
at the fill level indicator (2) on the tank.
 Stop the filling process before reaching
the maximum fill level.
 Screw the cap (1) back onto the C connection.
Filling the cleaning agent tank (Version 2)
 Open the tank cap (3)
 Fill approximately 130 litres of cleaning agent
via the filling port (4). Monitor the fill level
indicator (5) during the process.
 Screw the tank cap (3) back on.
20.5.2 Calling up kilometres and hours
 Turn off auxiliary engine and start the ignition.
 Press the INFO button (1).
 Select total or daily data with the buttons (2).
The corresponding symbol bar (3/4) illuminates.