Translation of Original Operating Instructions
Airport Sweeper / Airport Stand Cleaner
2017-02-02 132
18 After sweeping
DANGER
Preventing accidents
► Eliminate any discovered defects immediately
Parking the machine safely
o Park the machine on level ground that is able
to support its weight
o Activate the handbrake
o Raise sweeper unit, disc brush and blowing
unit and stop them being lowered by using
transit locks.
o For the snowplough, see separate operating
instructions
o Switching off the auxiliary engine
o Switch off the control panel
o Switch off the vehicle
o Take out the ignition key to start the vehicle
engine and auxiliary engine
o Lock the cab
o Place wheel chocks under both wheels so that
the machine cannot roll away.
Clean the machine.
Check the brushes for foreign bodies; remove
foreign bodies if necessary.
Carry out a visual inspection for leakages
Carry out a visual inspection for damaged parts
Check wear-and-tear parts
Check for loose parts
Check the warning signs
Check the lights
Check the warning lights
To Next Page
Loading...