Schweitzer Engineering Laboratories SEL-3031 - Table A.2 Instruction Manual Revision History

Date Code 20181001 SEL-3031 Instruction Manual
Firmware and Manual Versions
Instruction Manual
A.3
Table A.2 Instruction Manual Revision History (Sheet 1 of 3)
Date Code Summary of Revisions
20181001
Section 1
➤ Updated Specifications.
20180613
Section 1
➤ Updated Table 1.1: Radio Antenna and Cable Accessories.
Section 2
➤ Updated Table 2.2: Antennas Permitted for Use with the SEL-3031.
Section 4
➤ Updated Table 4.14: Factory-Default Passwords.
➤ Updated Table 4.18: SER Command.
20180330
Section 1
➤ Updated Compliance in Specifications.
Appendix B
➤ Updated Technical Support.
20160804
Section 1
➤ Updated Table 1.1: Radio Antenna and Cable Accessories.
20160203
General
➤ Updated cable information to include RG-8X.
Section 1
➤ Updated Table 1.1: Radio Antenna and Cable Accessories.
20150203
Preface
➤ Updated Safety Information.
Section 1
➤ Updated Table 1.1: Radio Antenna and Cable Accessories.
➤ Added Figure 1.1: Radio Antenna Connections.
➤ Changed Certifications to Compliance, and moved it to the beginning
of Specifications.
➤ Added Power Consumption With SEL-3044 Card in Specifications.
➤ Updated Table 1.2: Government Approvals.
Section 2
➤ Updated Figure 2.6: SEL-C693 Cable: Two-Wire EIA-485 Connections.
Section 4
➤ Added CAL Level information.
Section 5
➤ Updated fade margin and radio availability information in Monitoring
and Improving Radio Link Performance.
Preliminary Copy—Subject to Change