Schweitzer Engineering Laboratories SEL-3031 - Figure 4.10 RAD Command Response; Table 4.18 SER Command

SEL-3031 Instruction Manual Date Code 20181001
Settings and Commands
Commands
4.24
1 2 3 4 5 6 7 8
12345678901234567890123456789012345678901234567890123456789012345678901234567890
[Common Header]
RSSI
-69 dBm
AVAILABILITY: From 10/02/2009 17:33:21
Overall
100.00 %
Zone 1 Zone 2 Zone 3 Zone 4 Zone 5
100.00 % 100.00 % 100.00 % 100.00 % 100.00 %
Zone 6 Zone 7 Zone 8 Zone 9 Zone 10
100.00 % 100.00 % 100.00 % 100.00 % 100.00 %
Figure 4.10 RAD Command Response
SER Command
Use SER to view and manage the Sequential Events Recorder report, as shown in
Table 4.18.
If the requested SER report rows do not exist, the device will respond with the
following:
NO SER data
SET Command
The SET command is for viewing or changing device settings, as shown in Table 4.19.
Append TERSE to skip the settings display after the last setting. Use this parameter to
speed up the SET command. If you want to review the settings before saving, do not
use the TERSE option.
Table 4.18 SER Command
Command Description Access Level
SER Displays a chronological progression of all avail-
able SER rows (as many as 1024 rows); Row 1 is
the most recent and Row 1024 is the oldest.
1
SER row 1
SER row 1 row 2
SER date 1
SER date 1 date 2
Displays a chronological or reverse chronological
subset of the SER rows.
1
SER C Clears/resets all SER records. 2
Preliminary Copy—Subject to Change