SEL-3031 Instruction Manual Date Code 20181001
Settings and Commands
Settings
4.6
Step 3. Type the filename and click Open.
a. Highlight the device or setting in the A database.
b. Select Copy or Move, and click the > button to create a new
device or setting in the B database.
Step 4. Reverse this process to take devices from the B database to the A
database. Copy creates an identical device that appears in both
databases. Move removes the device from one database and places
the device in another database.
Create a New Database/Copy an Existing Database
To create a new database, perform the following:
Step 1. Open File > Database Manager and click Create New Database.
QuickSet will prompt you for a file name.
Step 2. Type the new database name (and location if it differs from the
previous database location), and click Save. QuickSet displays the
message
Settings [path and file name] was
successfully created
.
Step 3. Click OK.
To copy an existing database of devices to a new database, perform the following:
Step 1. Open File > Database Manager and click Copy/Move Settings
Between Databases in the Database Manager dialog box. QuickSet
will open the last active database and assign it as Database A.
Step 2. Click Open B. QuickSet will prompt you for a file location. Type the
new database name, click Open, and click Yes. The program will
then create an empty database. Load devices into the new database as
shown in Copy/Move Settings Between Databases.
Settings
QuickSet allows you to create settings for one or more SEL-3031 devices. Store
existing device settings downloaded from the SEL-3031 by creating a library of
settings, then modify and upload these settings from the library to an SEL-3031.
QuickSet makes setting the device easy and efficient and provides rules-based settings
checks, commissioning, and help.
Settings Editor
The Settings Editor shows device settings in easy-to-understand categories. and makes
setting the device simple and efficient. Settings are grouped logically, and settings that
are not used in the selected group are dimmed (grayed) in the QuickSet menus.
To Next Page
Loading...
